| |
|
fmp
Flanged Maintenance Pipe
Features
/ Benefits
Ironhed, LLC presents
the Flanged Maintenance Pipe Conduit Repair System (FMP system).
This system is available in both galvanized and black iron.
It comes in .137", .188" and .250 wall thicknesses.
Field splices are easily made with a standard 1/2 inch wrench,
a cordless drill, 3/8 inch drill bits, and partner saw to terminate
standard IPS conduit sizes.
|
|
Leave your welder,
special adapters and pipe threader at the shop!
This system will provide
excellent protection for existing cables and conduit. One-inch wide
flanges provide maximum strength and a uniform seal. Assembly with
stainless steel nuts and bolts reduces corrosion and eases reentry
at a later
date. Primary uses are buried & bridge maintenance applications,
temporary and emergency cable protection.
Features
/ Benefits
| Features |
Benefits |
Continuous
Flange
|
- Ability to cut and
splice at all intervals of your project.
- Creates a uniform
fit the full length of the pipe
|
Staggered
Joint
|
- Re-enter at any
point after assembly.
- No need for couplings
to assemble multiple sections.
- Maintain rigidity
of assembled sections.
- Can raise and lower
without sags or kinkage.
- Increase installation
production
|
Large
inside diameter - matches outside diameter of IPS pipe.
|
- Increases "real
estate" for cabling and / or innerducts.
- Terminate to existing
IPS infrastructure without special fittings.
|
|
- Ability to re-enter
at a later date.
|
Rotateable
coupler for sweep attachment.
|
- Ability to change
direction a full 360 degrees.
|
This web site was designed
to help familiarize installers, inspectors, line crew, construction
supervisors, and engineers with the FMP Flanged Maintenance Pipe Systems
and provide some helpful installation tips. These recommendations have
come from first hand experiences with the maintenance contractors and
supervisors around the country..
|
|
 |
