FMP
System
FMP Installation Guide
FMP Bends, Fittings, Adapters
FMP
Catalog & Ordering Information
The
Flanged staggered joint system requires no couplings. This stagger eliminates
joint buckle and possible damage to cable or conduit during back fill
operations. Building the Ironhed system to adapt to any standard IPS
conduit with a
uniform compression fit will save you material and labor cost and provide
up to 25 % more capacity for your cable and inner-duct. Ironhed systems
are built to specification providing a simple installation with a
uniform
fit. This
will eliminate sharp edges and wide gaps from warping caused by plasma
or torch cuts, easy entry and reentry using all stainless steel hardware.
Terminate
to PVC, HDPE or Steel conduit without special fittings.
| .137 Wall |
| Part Number | I.D. | Length | Weight | Wall |
|---|
| FMP 210/10 | 2.375 IN. | 10 FT. | 5.6 |
.137 |
| FMP 205/10 | 2.375 IN. | 5 FT. | 5.6 | .137 |
| FMP 410/10 | 4.500 IN. | 10 FT. | 8.4 | .137 |
| FMP 405/10 | 4.500 IN. | 5 FT. | 8.4 | .137 |
| FMP 510/10 | 5.563 IN. | 10 FT. | 10.1 | .137 |
| FMP 505/10 | 5.563 IN. | 5 FT. | 10.1 | .137 |
| FMP 610/10 | 6.625 IN. | 10 FT. | 12 | .137 |
| FMP 605/10 | 6.625 IN. | 5 FT. | 12 | .137 |
| .188
Wall |
| FMP210/187 |
2.375 IN. |
10 FT. |
7.1 LBS. |
.188 IN. |
| FMP310/187 |
3.500 IN. |
10 FT. |
8.8 LBS. |
.188 IN. |
| FMP410/187 |
4.500 IN |
10 FT. |
10.8 LBS. |
.188 IN. |
| FMP510/187 |
5.563 IN. |
10 FT. |
12.8 LBS. |
.188 IN. |
| FMP610/187 |
6.625 IN. |
10 FT. |
14.9 LBS. |
.188 IN. |
| .250
Wall |
| FMP210/250 |
2.375 IN. |
10 FT. |
8.2 LBS. |
.250 IN. |
| FMP310/250 |
3.500 IN. |
10 FT. |
11.7 LBS. |
.250 IN. |
| FMP410/250 |
4.500 IN |
10 FT. |
14.5 LBS. |
.250 IN. |
| FMP510/250 |
5.563 IN. |
10 FT. |
17.3 LBS. |
.250 IN. |
| FMP610/250 |
6.625 IN. |
10 FT. |
20.2 LBS. |
.250 IN. |
Ironhed,
LLC Catalog (PDF)
Steel
Pipe Specifications (PDF)
